Pass Your Next ANVE Certification Exam Easily & Hassle Free
Free Axis ANVE Exam Question Practice Exams
The Axis ANVE exam covers a wide range of topics, including network video technologies, network design, installation, and configuration of Axis network cameras and video encoders, as well as video management software and analytics. It also includes best practices for system integration and troubleshooting.
Axis ANVE certification program is an excellent opportunity for professionals in the security industry to validate their expertise in Axis network video solutions. Axis Network Video Exam certification provides a competitive edge and enhances the individual's professional profile. With the global recognition of the certification, individuals can expand their employment opportunities and demonstrate their commitment to professional development.
Axis ANVE Certification Exam is a comprehensive test that evaluates a candidate's technical knowledge and skills, as well as their ability to apply this knowledge in real-world scenarios. It is a challenging exam that requires a significant amount of preparation and study to pass.
NEW QUESTION # 33
What are the effects of changing the capture mode on an AXIS P1346 from 2048x1536 (3 MP) to
1 920x1080 (HDTV)? (Choose two)
- A. Maximum frame rate increases
- B. Vertical angle of view decreases
- C. Maximum frame rate decreases
- D. Motion blur increases
- E. Minimum illumination decreases
Answer: A,B
NEW QUESTION # 34
An installer needs a camera to monitor a hallway in an office complex. The hallway is 2.5 m (8 ft 2 in) wide.
The customer wants to be able to identify people (80 pixels per face). What is the minimum resolution needed to meet this requirement?
- A. 1024x768
- B. 800 x 600
- C. 1280x720
- D. 1920x1024
Answer: C
NEW QUESTION # 35
When using HTTPS on Axis products, true security is implemented after the
- A. 256 character password is in place.
- B. 64 character password is in place.
- C. MAC address filtering is activated.
- D. Signed certificate is installed.
Answer: D
NEW QUESTION # 36
In a network surveillance installation, the purpose of a router is to
- A. Forward the video stream to the correct receiver within a network.
- B. Separate audio and video traffic to reduce audio latency.
- C. Forward the video stream between networks.
- D. Separate the video stream from the camera control signaling.
Answer: C
NEW QUESTION # 37
If image clarity changes are made within the camera web interface, but are not reflected within a Video
Management Software (VMS), what is the most likely cause of the camera not accepting the settings?
- A. The VMS is overwriting the changes in the camera
- B. The camera is faulty and needs to be replaced
- C. The camera's advanced settings need to be changed first
- D. The user does not have administrative rights to change the settings
Answer: A
NEW QUESTION # 38
A camera can deliver up to two full resolution 30 fps H.264 streams. The customer wants to have four
H.264 streams from the same camera. What will be the resulting impact?
- A. The camera will lower the Group of Video (GOV) length
- B. The camera will lower the compression
- C. The camera will lower the frame rate
- D. The camera will lower the resolution
Answer: C
NEW QUESTION # 39
DRAG DROP
Match the protocol to its default port number. Drag each gray box from the left column to the matching blue box in the right column.
Answer:
Explanation:
NEW QUESTION # 40
A camera lens with a low f-stop value of 1.2 will outperform a lens with a higher f-stop value due to which one of the parameters below?
- A. Better depth of field
- B. Less image artifacts
- C. Improved sharpness
- D. Better low light capability
Answer: D
NEW QUESTION # 41
While setting up an AXIS Q7404 Video Encoder for control of an analog PTZ using Pelco D protocol, you run into a problem. After uploading of the proper Pelco drivers into the AXIS Q7404 Video Encoder you find that channel 1 is controlling the wrong analog PTZ. Which option below would you adjust to fix this problem so you can avoid changing physical cables?
- A. Device type
- B. Device ID
- C. Baud rate
- D. IP address
Answer: B
NEW QUESTION # 42
DRAG DROP
Match the best choice of camera to each scenario described. Drag each gray box from the left column to the matching blue box in the right column.
Answer:
Explanation:
NEW QUESTION # 43
Which setting would best adjust a hard yellow tint as shown in the pictures below?
- A. Image contrast
- B. Image brightness
- C. White balance
- D. Color saturation
Answer: C
NEW QUESTION # 44
Which feature in Axis cameras allows for a fixed box style camera to tell a PTZ camera to move to a preset?
- A. TCP/IP
- B. FTP server
- C. QoS
- D. HTTP server
Answer: D
NEW QUESTION # 45
An integrator receives a specification for surveillance cameras for a large project, where the requirements are impossible to live up to. Which of the key numbers below would have to change in order to find a camera to fill the demands?
- A. 60 fps
- B. 1080pHD resolution
- C. Face recognition at 70 m (230 ft)
- D. 160 dB dynamic range
Answer: D
NEW QUESTION # 46
When using Axis' Corridor Format
- A. Privacy masks block out areas outside the specified corridor width.
- B. The image is rotated 90 degrees, changing the aspect ratio to 9:16.
- C. The depth of field is automatically adjusted to keep the entire length of a corridor in focus.
- D. Axis PTZ cameras can automatically track people walking down a corridor.
Answer: B
NEW QUESTION # 47
What is one of the main purposes of using AXIS Camera Application Platform?
- A. Loading of applications directly to the SD/SDHC card on the camera
- B. Loading of VAPIX applications directly on the camera
- C. Loading of applications to be run directly on the camera
- D. Loading a Video Management Software (VMS) to be run directly on the camera
Answer: C
NEW QUESTION # 48
What is the benefit of deinterlacing the video in a video encoder?
- A. It gives the encoded video a higher frame rate compared to the analog input video
- B. It decreases the bandwidth needed to transmit the compressed video
- C. It reduces the tearing effects when there is movement between two fields in one frame
- D. It enhances the dynamic range between two fields in one frame
Answer: C
NEW QUESTION # 49
Working with the end user, you find that they need a cost-effective mini dome with a varifocal lens. DC-iris and audio capabilities are not required. Which of the following products would best fit the requirements?
- A. AXIS M3204
- B. AXIS P3343
- C. AXIS M1113
- D. AXIS P3301
Answer: A
NEW QUESTION # 50
Axis recommends shielded cables for outdoor installations primarily to ensure
- A. Conformity with SMPTE standard.
- B. Life time of cable installations.
- C. Surge protection.
- D. Image quality.
Answer: C
NEW QUESTION # 51
The advantage of using multicast in the network is that
- A. The video stream only needs to be sent once, even though there are multiple viewers.
- B. Many cameras can share the same network connection.
- C. The video stream reaches every computer in the network simultaneously.
- D. The video stream is rerouted in case of network dropout.
Answer: A
NEW QUESTION # 52
How does the AXIS Design Tool allow users to estimate the effects of scene complexity and motion on bandwidth and storage usage?
- A. AXIS Design Tool uses a statistical model based on selected camera model
- B. Users can view model scenario videos and select the scenario that best matches their scene
- C. Users can upload recorded surveillance video to allow AXIS Design Tool to make estimates
- D. AXIS Design Tool requires users to manually enter their own estimated bit rate for each camera
Answer: B
NEW QUESTION # 53
The term f-stop, or f-number,
- A. Measures the lens' capability to focus on objects at short distance.
- B. Is the end position of the focus motor in an autofocus system.
- C. Measures the lens' capability to collect light.
- D. Relates the focal length of the lens to the zoom factor.
Answer: C
NEW QUESTION # 54
When dealing with a complicated lighting scenario, such as a camera inside looking out through bright windows, which camera would best adapt to the scene to provide the highest image detail?
- A. AXIS P5534
- B. AXIS P3304
- C. AXIS M3204
- D. AXIS Q1604
Answer: D
NEW QUESTION # 55
A P-iris lens is
- A. Axis' standard for DC-iris.
- B. An iris with higher light sensitivity.
- C. An iris specially made for zoom lenses.
- D. A DC-iris with feedback.
Answer: D
NEW QUESTION # 56
In a network surveillance installation, the purpose of a switch is to
- A. Forward the video stream between networks.
- B. Forward the video stream to the correct receiver within a network.
- C. Disconnect devices with invalid IP addresses from the network.
- D. Disconnect malfunctioning cameras from the network.
Answer: B
NEW QUESTION # 57
In setting up PTZ control for an Axis encoder, it's very easy to overlook a very important step in the configuration process. After properly connecting the communication wires to the encoder, the next recommended step in the setup is:
- A. Uploading the correct PTZ driver
- B. Setting the Baud Rate to match the analog PTZ' s
- C. Setting the Device ID to match the analog ID
- D. Downloading the correct Device ID from the Axis website
Answer: A
NEW QUESTION # 58
......
Ace ANVE Certification with 145 Actual Questions: https://actualtorrent.exam4pdf.com/ANVE-dumps-torrent.html
